เครื่องตรวจวัดสภาพน้ำมันเบรค ใช้เวลาเพียง 5 วินาที ช่างสามารถรู้ทันทีว่าน้ำมันเบรคต้องเปลี่ยนหรือไม่ และสามารถแสดงให้ลูกค้าดูได้เข้าใจง่ายใช้ได้ทั้ง DOT 3, DOT 4, DOT 5 ช่างทั่วไปไม่สามารถบอกได้ว่าน้ำมันเบรคที่ใสอาจจะมีความชื้นและหมดสภาพเป็นอันตรายมากต่อระบบเบรค
 
<Usage>

1. Clean the two electrodes on the top of the test lead.
2. Insert 2cm of the test lead into new brake oil.
 3. Press the test switch.
4. Set the reset volume to "0" position.
5. Insert the test lead into the brake oil the car.
6. Press the test switch and check the value in the display.

brake fluids

  • Have to use DC 9V battery.
  • While pressing the test switch, there is no sound of signal, you have to replace the battery
  • Generally distinguish the brake fluid into DOT3, DOT4, DOT5, the safety standard of automobile brake fluid was prescribed in the FAVSS.NO.11660 clause in USA.
     

NO.2102  ราคา  4,560  บาท


 

DOT 3

DOT 4

DOT 5

 SPECIFIC GRAVITY

Above 205 C

Above 230 C

Above 260 C

WET SPECIFIC GRAVITY

Above 140 C

Above 155 C

Above 180 C

VISCOSITY
(mm2 /S)

100 C

-40V

Above 1.5 C

Above 1.5 C

Above 1.5 C

Below 1500 C

Below 1500 C

Below 1500 C


 
  • Brake fluid has the difference of the change of specific gravity regarding containing water capacity between each brand. And it shows the containing water capacity according to the period be used.(If the containing water capacity is high,it will cause the corrosion and damage of the brake system.)
     

AMR AUTOPART AND SERVICE CO.,LTD.
TEL : 0-2939-0055 ต่อ 300 FAX : 0-2513-9000
EMAIL : AMORNCARE@YAHOO.COM
WWW.AMR1966.COM